How to Replace a Nissan Juke Spare Key
Nissan Juke is a fun and stylish hatchback with an unusual engine setup. It's noisy, however it's still a fun car to drive.
The key fob battery on the Nissan Juke has to be replaced every two years or so, or if it's low. It's easy to do at home, however you'll need some tools.
Dead Coin Battery
If the key fob of your Nissan Juke is not working, you should check the battery in the coin. It could be dead and must be replaced. This is a quick fix that only takes some minutes. It's as easy as flipping the fob upside down and removing the small latch and release on the back. Take out the old battery and then pop in the new one, ensuring sure that it is facing down in the fob. Line up The Keylab of the fob in a careful manner.
The fob must be cleaned if it has been exposed to water before you can put in the new battery. It is possible to clean the fob by using isopropyl electronic cleaner and a towel. Then, let it dry completely prior to installing the battery.
The key fob must also to be connected with the car to be able to start the car. This can be accomplished by following the instructions in the owners manual or using an OBDII scanner. The most likely reason why the key fob was not working was because it was not paired. A malfunctioning chip inside the fob may cause it to cease to function, but this is rare. In this instance the need for a new receiver module could be required. If this is the scenario, it's going to need to be replaced by an accredited technician.
Water Damage
The key fob is powered by a battery, and these batteries must be replaced every two years or so, or at the first sign of your car not responding when you press the "start" button. The key's rubber seals keep water out, but submerging a key fob into the pool or ocean can damage the electronic chip. If this happens, you will need to obtain a new key from Nissan or an automotive locksmith.
If the key fob is equipped with an active chip It's likely that the computer has simply lost connection to it, and this could occur for a variety of reasons. This can be fixed by restarting the car. If the "Key ID error" message is still visible, you will need to contact Nissan for assistance.
The three most frequent causes of this problem are dead battery on the key fob, a non-programmed key, and a damaged or malfunctioning key fob that is damaged or faulty. The first two problems are fairly easy to fix while the third one is more difficult to determine and fix immediately but can be solved with patience. Compare Nissan Key Replacement prices in your area with WhoCanFixMyCar and schedule your repair online. It only takes two minutes and you can read customer reviews from local garages, Nissan car mechanics and dealerships before deciding.
Faulty Chip
The key fob of your Nissan Juke has a special chip that sends an electronic signal to the car whenever you turn it. The key may be inoperable because the chip is malfunctioning. If this is the case the issue is only solved by replacing the key. There are a myriad of reasons your Nissan Juke's keys could be defective, such as water damage or a dead coin battery, or a broken receiver module.
Examine the chip for water damage when your key fob stopped working after a wash or bath. Make sure the retainers on the chip are secure. Also, make sure the chip isn't in contact with water. If you see any signs of water damage, try removing the battery and then wiping the electronic component with isopropyl alcohol, or electronic cleaner.
If the chip is damaged You'll need to contact your local locksmith or dealer. In order to find a replacement, they will need the year, model and year of your car. You'll also need to note down the VIN (Vehicle Identification Number) so that the dealer or locksmith knows exactly which key you have. This will allow them to look up the correct key code and confirm that they are cutting the correct key.
Faulty Receiver Module
The key fob transmits radio frequency signals to your car that performs a number of functions. The key fob is able to unlock your trunk while you hurry with your groceries to the car or start your car by pressing the fob's button. It can also open your windows and turn on the horn if you accidentally lock the keys in your car.
If the key fob won't work, it may be due to a problem in the receiver module. The receiver modules are tuned so that they can pick up specific frequencies which correspond to the signals that are transmitted by Nissan key fobs. If your car has an inoperable receiver module and it stops responding to any signal sent by the key fob.
It is always a good idea to have a spare Nissan key fob in the event that the original key you have or breaks. A locksmith or dealer can program a spare key to work with your Nissan. This will help you avoid the hassles of losing your keys or locking them in your car.
If your Nissan Juke key fob is exposed to clean water from the tap or rain the issue can be resolved by cleaning it with isopropyl alcohol or electronic cleaner. However, if the chip is damaged and you need to purchase a replacement key fob that can be assigned to your vehicle through a locksmith or dealer.